Creating a Target Curve for a Tag

To create a target curve:

Specify the site and tag for which the target curve will apply

  1. Click Target Curves to open the Target Curves module.
  2. Click Add to create a new target curve and enter the following details:

    PropertyDescription

    Tag

    This is the tag for which this curve applies. Click Find and use the tag chooser to select a tag.

    Target type

    Specify the type of the target data. This can be:

    • Operating value
    • Inflow probability
    • Maximum
    • Minimum
    • Average

    Begin/End date

    The period for which the target curve is valid

    If you are adding a new target curve to a tag that already has existing target curves, the valid period of the curves must not overlap.

  3. Click Save to save your changes.

Enter the target point data

  1. Select the new target curve and open the Points tab.
  2. Click Insert to add new points.

    Note:

    You can also import points from a spreadsheet, see Importing Target Points for details.

  3. Enter the point details. The details required depend on the target type:
    • For any target type other than Inflow Probability, enter the Time when the target applies, and the target Value at that time.
    • For Inflow Probability, enter the Probability that the inflow will exceed the target value, and the target Value.
  4. Click Save to save your changes.



Help for SPM, version 3.4. Topic updated: 30 May 2018. Help published: 14 June 2019