Average Flow Report
Report Description
The Average Flow report lists the average flow rate through a single regulator or a group of regulators at specified times of day during the reporting period.
To report the instantaneous flow rate at specific intervals, rather than the average flow rate, use the Flow Summary Report.
Note
To report on groups of regulators you must first set up Summary Regulator Groups. See the Summary Regulator Groups Module for more details.
Report Parameters and Options
| Parameter | Description |
|---|---|
|
Regulator/Regulator Group |
Select an individual regulator or a group of regulators for the report. If you choose to report on a group, you can select from any of the configured Summary Regulator Groups. |
|
Date Lodged From/To |
Specify the reporting period |
|
Start Time |
The Average Flow report lists the average flow at fixed intervals during the day. The time of the first reported flow data point each day is given by this parameter and the interval between flow data points is given by the Change Interval. |
|
Change Interval |
This specifies in hours how frequently the flow is reported each day.
For example, if the start time is 00:00 and the change interval is 12 hours, the flow is reported at 00:00 and 12:00 each day. |
Report Output
| Property | Description |
|---|---|
|
Regulator |
Name and description of the regulator and of the channel |
|
Time/Date |
Time and date of each data point |
|
Average Flow |
Average flow over the last change interval. |
Related Reports
The Flow Summary report lists the instantaneous flow rate through a single regulator or a group of regulators at specified intervals during a reporting period.